1996 San Francisco
- Sensor Signal Validation using Analytical Redundancy for an Aluminum Cold Rolling Mill
N.G. Walker, G.F. Wyatt-Mair (US)
Control Engineering Practice, vol. 3, nb. 6, pp 753-760, 1995
10.1016/0967-0661(95)00058-3
1999 Beijing
- Survey
Electrical assistance for SI engine idle-speed control
P. Bidan, L.K. Kouadio, M. Valentin, G. Montseny (FR)
Control Engineering Practice, vol. 6, nb. 7, pp 829-836, 1998
10.1016/S0967-0661(98)00061-6 - Theory/Methodology
Optimization of boiler control to improve the load-following capability of power-plant units
J.H. Mortensen, T. Moelbak, P. Andersen, T.S. Pedersen (DK)
Control Engineering Practice, vol. 6, nb. 12, pp 1531-1539, 1998
10.1016/S0967-0661(98)00114-2 - Application
A distributed expert control system for a hydrometallurgical zinc process
M. Wu, M. Nakano, J.H. She (JP)
Control Engineering Practice, vol. 6, nb. 12, pp 1435-1446, 1998
10.1016/S0967-0661(98)00122-1
2002 Barcelona
- Survey
Industrial Application of a Nonlinear Model Predictive Control to Polymerization Reactors
H. Seki, M., Ogawa, S. Ooyama, K. Kamatsu, M. Ohshima, W. Yang (JP)
Control Engineering Practice, vol. 9, nb. 8, pp 819-828, 2001
10.1016/S0967-0661(01)00046-6 - Theory/Methodology
Evaluation H-infinite Controllers on the NRC Bell 205 fly-by-wire helicopter
A.J. Smerlas, D.J. Walker, I. Postlethwaite, M.E. Strange, J. Howitt, A.W. Gubbles (UK)
Control Engineering Practice, vol. 9, nb. 1, pp 1-10, 2001
10.1016/S0967-0661(00)00088-5 - Application
Intelligent Control System of an Industrial Lime Kiln Process
M. Järvensivu, K. Saari, S.-L. Jämsä-Jounela (FI)
Control Engineering Practice, vol. 9, nb. 6, pp 589-606, 2001
10.1016/S0967-0661(01)00017-X
2005 Prague
- Survey
A survey of industrial model predictive control technology
S. Joe Qin, Thomas A. Badgwell (US)
Control Engineering Practice, vol. 11, nb. 7, pp 733-764, 2003
10.1016/S0967-0661(02)00186-7 - Theory/Methodology
Run-to-run control and performance monitoring of overlay in semiconductor manufacturing
C. A. Bode, B. S. Ko, T. F. Edgar (US)
Control Engineering Practice, vol. 12, nb. 7, pp 893-900, 2004
10.1016/S0967-0661(03)00154-0 - Application
An automated gantry crane as a large workspace robot
O. Sawodny, H. Aschemann, S. Lahres (DE)
Control Engineering Practice, vol. 10, nb. 12, pp 1323-1338, 2002
10.1016/S0967-0661(02)00097-7
2008 Seoul
- Survey
Evaluation study of an efficient output feedback nonlinear model predictive control for temperature tracking in an industrial batch reactor
Z. K. Nagy, B. Mahn, R. Franke, F. Allgöwer (DE)
Control Engineering Practice, vol. 15, nb. 7, pp 839-850, 2007
10.1016/j.conengprac.2006.05.004 - Theory/Methodology
Identification of a toroidal continuously variable transmission using continuous-time system identification methods
M. Mensler, S. Joe, T. Kawabe (JP)
Control Engineering Practice, vol. 14, nb. 1, pp 45-58, 2006
10.1016/j.conengprac.2005.01.001 - Application
Modeling and control of a novel heat exchange reactor, the Open Plate Reactor
S. Haugwitz, P. Hagander, T. Norén (SE)
Control Engineering Practice, vol. 15, nb. 7, pp 779-792, 2007
10.1016/j.conengprac.2006.02.019
2011 Milan
- Survey
Design, tuning, and evaluation of a full-range adaptive cruise control system with collision avoidance
S. Moon, I. Moon, K. Yi (KR)
Control Engineering Practice, vol. 17, nb. 4, pp 442-455, 2009
10.1016/j.conengprac.2008.09.006 - Theory/Methodology
On optimal motorcycle braking
M. Corno, S.M. Savaresi, M. Tanelli, L. Fabbri (IT)
Control Engineering Practice, vol. 16, nb. 6, pp 644-657, 2008
10.1016/j.conengprac.2007.08.001 - Application
Tuning and auto-tuning of fractional order controllers for industry applications
C.A. Monje, B.M. Vinagre, V. Feliu, Y.Q. Chen (ES)
Control Engineering Practice, vol. 16, nb. 7, pp 798-812, 2008
10.1016/j.conengprac.2007.08.006
2014 Cape Town
- Survey
Precision flight control for a multi-vehicle quadrotor helicopter testbed
G.M. Hoffmann, H. Huang, S.L. Waslander, C.J. Tomlin (US/US/CA/US)
Control Engineering Practice, vol. 19, nb. 9, pp 1023-1036, 2011
10.1016/j.conengprac.2011.04.005 - Theory/Methodology
Hybrid intelligent control for optimal operation of shaft furnace roasting process
T. Chai, J. Ding, F. Wu (CN)
Control Engineering Practice, vol. 19, nb. 3, pp 264-275, 2011
10.1016/j.conengprac.2010.05.002 - Application
A passivity-based controller for coordination of converters in a fuel cell system
M. Hilairet, M. Ghanes, O. Béthoux, V. Tanasa, J-P. Barbot, D. Normand-Cyrot (FR)
Control Engineering Practice, vol. 21, nb. 8, pp 1097-1109, 2013
10.1016/j.conengprac.2013.04.003
2017 Toulouse
- Optimal control for chatter mitigation in milling—Part 1: Modeling and control design
J. Monnin, F. Kuster, K. Wegener (CH)
Control Engineering Practice, vol. 24, pp 156-166, 2014
10.1016/j.conengprac.2013.11.010 - Optimal control for chatter mitigation in milling—Part 2: Experimental validation
J. Monnin, F. Kuster, K. Wegener (CH)
Control Engineering Practice, vol. 24, pp 167-175, 2014
10.1016/j.conengprac.2013.11.011
2020 Berlin
- Survey
Trajectory planning and tracking control for the temperature distribution in a deep drawing tool
T. Böhm, T. Meurer (DE)
Control Engineering Practice, vol. 64, pp 127-139, 2017
10.1016/j.conengprac.2017.04.004 - Theory/Methodology
Adaptive feedforward control of exhaust recirculation in large diesel engines
K. Vodder Nielsen, M. Blanke, L. Eriksson, M. Vejlgaard-Laursen (DK/DK/SE/DK)
Control Engineering Practice, vol. 65, pp 26-35, 2017
10.1016/j.conengprac.2017.05.003 - Application
State estimation and advanced control of the 2D temperature field in an experimental oscillating annealing device
L. Jadachowski A. Steinboeck A. Kugi (AT)
Control Engineering Practice, vol. 78, pp 116-128, 2018
10.1016/j.conengprac.2018.06.011
2023 Yokohama
- Survey
Robust nonsingular fast terminal sliding-mode control for Sit-to-Stand task
J. Hernández Hernández, S. Salazar Cruz, R. López-Gutiérrez, A. González Mendoza, R. Lozano
Control Engineering Practice, vol. 101, no. 104496, 2020
10.1016/j.conengprac.2020.104496 - Theory/Methodology
Finite-time control design for a quadrotor transporting a slung load
Z. Lv, Q. Zhao, S. Li, Y. Wu
Control Engineering Practice, vol. 122, no. 105082, 2022
10.1016/j.conengprac.2022.105082 - Application
Data-driven adaptive predictive control of hydrocracking process using a covariance matrix adaption evolution strategy
Z. Li, X. Wang, W. Du, M. Yang, Z. Li, P. Liao
Control Engineering Practice, vol 125, no. 105222, 2022
10.1016/j.conengprac.2022.105222
2026 Busan
- Nonlinear model predictive temperature control of a cooling process for steel strips undergoing phase transformations
M. Niederer, P. Zeman, S. Sannes, H. Seyrkammer, G. Helekal, A. Kugi, A. Steinboeck
Control Engineering Practice, vol. 165, no. 106512, 2025
10.1016/j.conengprac.2025.106512 - Model-based velocity-tracking-control of self-erecting industrial tower cranes
M. Thomas, T. Englert, O. Sawodny
Control Engineering Practice, vol. 147, no. 105928, 2024
10.1016/j.conengprac.2024.105928 - Physics-guided neural networks for feedforward control with input-to state-stability guarantees
M. Bolderman, H. Butler, S. Koekebakker, E. v. Horssen, R. Kamidi, T. Span-Burke, N. Strijbnosch, M. Lazar
Control Engineering Practice, vol. 145, no. 105851, 2024
10.1016/j.conengprac.2024.105851
